Welcome to Jincheng Metal Products (Tianjin) Co., Ltd.
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
<strong> Aluminum foil</strong> surface is clean, sanitary, no bacteria or micro-organisms can not grow on its surface.<br> <strong> aluminum foil</strong> is a non-toxic packaging material, it can directly contact with food without any harm to human health.<br> <strong>aluminum foil</strong> is a kind of tasteless odorless packaging material, will not make the packaging of food have any peculiar smell.<br> <strong>aluminum foil</strong> itself is not volatile, it itself and packaged food will never dry or shrink.
<strong>2036 aluminum</strong> this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good. <br> <strong>2036 aluminum alloy</strong> features: high strength, a certain heat resistance, can be used for working parts below 150℃.<br> <strong>The strength</strong> of 2036 alloy is higher than that of 7075 alloy.
<strong>2036 aluminum </strong>this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good. <br> <strong>2036 aluminum alloy</strong> features: high strength, a certain heat resistance, can be used for working parts below 150℃. <br> <strong>The strength of 2036 alloy</strong> is higher than that of 7075 alloy. <br>
<strong>1070 aluminum </strong>has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding. <br> <strong> Make use of its advantages</strong> to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.
<strong>1070 aluminum </strong> has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding. <br> <strong> Make use of its advantages </strong> to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts. <br>
<strong> 5052 aluminum</strong> is Al-Mg alloy aluminum, magnesium is the main alloy element in <br> <strong>5052 alloy aluminum</strong> is the most widely used one kind of rustproof aluminum, this alloy has high strength, especially the fatigue strength: High plasticity and corrosion resistance, heat treatment can not be strengthened, in the semi-cold hardening plasticity is good, cold hardening plasticity is low, good corrosion resistance, good weldability, poor cutting performance, polishing.
<strong>The main alloying elements in 6061 alloy</strong> are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. <br> <strong>Widely</strong> used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
<strong>2024 aluminum alloy,</strong> the main alloying elements are copper and magnesium. <br> <strong>Applications</strong> where high strength but low weight ratio is required, and good fatigue strength. <br> <strong>Not weldable</strong> , general processing performance.<br> <strong> Because of poor </strong> corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.<br>
<strong>6082 </strong> is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance. <br> <strong>It also has moderate</strong> strength and can maintain good operability after annealing.<br> <strong>It is mainly </strong> used in mechanical structure, including bars, plates, pipes and profiles.
6082-T6 aluminum, the main alloying elements in the alloy are magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, coating, excellent anodic oxidation effect, is a typical extrusion alloy.
CONTACT US
Tel :+8619026598390
E-mail :administrator@sdbzsteel.com
WhatsApp :+8619026598390
Add : Room 1717, Gate 13, Gangcheng Hot Spring Garden, Jinqiao Street, Dongli District, Tianjin City
GET A FREE QUOTE
Copyright : Jincheng Metal Products (Tianjin) Co., Ltd.